Details...
well those cards were popular - 13 years ago when they were released in 1995...

they should be supported natively by windows 95 / 98.

from the S3 support page...

ViRGE (325) Drivers
ViRGE Graphics Drivers (DeviceID 5631)
Part Numbers
86C325 ViRGE (5631)

END OF SUPPORT ANNOUNCEMENT
S3 Graphics will no longer provide drivers for new operating systems or any other support for these devices.
The drivers provided below are the latest versions and will not be updated. 
http://www.s3graphics.com/en/resources/ … rchive.jsp

windows ME and NT4 were the last OS supported by the manufaturer,
thier most recent driver is dated may of 1999...

It is now ten years past the time for you to get a new video card

Since drivers are not available from an OEM source it is unlikely they will ever be included.
They have a very limited amount of ram, and The ViRGE was also unpopular for its lack of OpenGL support,
they really are not any good for use with modern NT OS's

so not possable and not desirable either.

in Nlite you need to uncheck the drivers option and it will work

As I said above
Anyways... make sure you are Integrating the Driver Packs with DPBase AFTER Nlite!
Also, if there any main system devices that are not found on the current packs please let us know, otherwise if it is a non-critical component (ex: modem, webcam, etc.) check out the 3rd Party Driver Packs Thread on this Forum for those driver packs.

...and BTW, Welcome to driverpacks!

~Dave

thanks again for help

2008-03-20 08:17:31 : <GUI>  Refreshed UpdateChecker with success.
2008-03-20 08:19:41 : <GUI>  Closed GUI.
2008-03-20 08:19:41 : <GUI>  Saved settings!
2008-03-20 08:19:41 : <CLNP> Temporary working directory successfully deleted.
2008-03-20 08:19:41 : Program terminated.

you checked for updates and closed it.

you must hit slipstream after you make your selections.

[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "C:\XP Source"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "RunOnceEx"

; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID        = "default"

; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "yes"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset    = "yes"
DP_CPU        = "yes"
DP_Graphics_A    = "yes"
DP_Graphics_B    = "yes"
DP_Graphics_C    = "yes"
DP_LAN        = "yes"
DP_MassStorage    = "yes"
DP_Sound_A    = "yes"
DP_Sound_B    = "yes"
DP_WLAN        = "yes"
DP_MassStorage_textmode = "yes"

; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl        = "CCC"

This is from the last try i had
i know the time on the driver install was less than 10 min. but do not recall the exact time (i believe that was for both methods)
and i thought i mentioned it was DriverPacks BASE 7.05.2... maybe i forgot wnt5_x86-32_disc?

I installed all the drivers listed above... guess the log does help lol
also i did notice when i ran VirtualBox in method 2 of the driver install it did show 10 drivers being unpacked but of course no drivers are needed in VirtualBox

Sorry about confusion thanks again for help

(the ones in RED marked "ALWAYS INCLUDE")

--------------------------------------------------------------------------------------------------

4. Don't forget to COPY/PASTE the relevant files INSIDE CODE tags.

ALWAYS include in your post
-DPs_BASE.ini (from the same directory as DPs_BASE.exe)
-DPs_BASE.log (from the same directory as DPs_BASE.exe)

IF RELEVANT, include in your post
-%SystemRoot%\DPsFnshr.log

5. Don't forget to MENTION the relevant DriverPack (or DriverPacks BASE) and its VERSION in the TITLE.

----------------------------------------------------------------------------------------------------

logs missing and versions were not mentioned either...

Again... in order to help you

You must submit the basic required info outlined in "read before you post"...

Oh and when i did install it on an xp laptop the drivers did not show up forgot to mention that

thanks,
Chetta

What drivers exactly didn't install?

Also, you don't need the Drivers option in nLite if you are going to use the driver packs. When you slip the drivers in with DP Base, make sure you don't  have the finisher method set to custom, otherwise you will have to manually start the finisher, I normally use GUIRunOnce and that makes an entry in WINNT.SIF at the very bottom that launches the finisher. Also, if you are using Method 2, you should see the drivers extracting before the Windows GUI mode setup begins.

~Dave

thanks,
Chetta