lararefaeli, That issue was marked [Solved] over a year and a half ago

But thanks for playing!

I think there is the problem about the power packer. Perhaps you did not add any necessory driver that could be helpful to you. I want to ask a question that, have you a SATA hard drive in your notebook?
Please check your settings, hope you can find solution for your trouble.

it is also likely that the base ini you sent is the one in its folder an not the one referenced in the log.

You are right. I had an error in one of Powerpacker ini files, so it used wrong DP ini.

Thank you very much and sorry for trouble,
Chris

the mass storage textmode drivers were not added (per your log)

it is also likely that the base ini you sent is the one in its folder an not the one referenced in the log.

ini:

[General]
; preferred language
prefLang    = "Polish"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"

[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "E:\SysImages\WinXPProPLSP2CorpDP"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "RunOnceEx"

; you should only add this section if you've set [Settings]\finishMethod to "RunOnceEx"
[RunOnceExSettings]
; custom/default, if not specified: default
startID        = "default"

; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "yes"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset    = "yes"
DP_CPU        = "yes"
DP_Graphics_A    = "yes"
DP_Graphics_B    = "yes"
DP_LAN        = "yes"
DP_MassStorage    = "yes"
DP_Sound_A    = "yes"
DP_Sound_B    = "yes"
DP_WLAN        = "yes"
DPs_3rd_party    = "yes"
DP_MassStorage_textmode = "yes"

; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl        = "CCP"

------------------------------------------------------------------------------------------

log (this isn't exactly log from that slipstreaming, because I've used DriverPacks many times since then, but I've repeated whole procedure):

2008-02-21 16:23:27 : <INIT> DriverPacks BASE 7.05.2 initialized in API mode by PowerPacker v1.0 RC8.
2008-02-21 16:23:27 : <INIT> Host environment: WIN_VISTA  on X64 CPU.
2008-02-21 16:23:27 : <INIT> Created temporary working directory.
2008-02-21 16:23:27 : <INIT> Imported proxy settings from Internet Explorer.
2008-02-21 16:23:35 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2008-02-21 16:23:35 : <INIT>     Detected DriverPack Chipset 7.10.1!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack CPU 7.04.1!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack Graphics A 7.10!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack Graphics B 7.12.1!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack LAN 8.02.1!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack MassStorage 8.02.1!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack Sound A 8.02.1!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack Sound B 7.12!
2008-02-21 16:23:35 : <INIT>     Detected DriverPack WLAN 8.02!
2008-02-21 16:23:35 : <INIT>     Detected 3rd party DriverPack(s).
2008-02-21 16:23:35 : <INIT>     Finished scanning.
2008-02-21 16:23:35 : <INIT> Using settings file in custom location: C:\Users\Sprinter\AppData\Local\Temp\DPs_Settings.ini.
2008-02-21 16:23:35 : <INIT> Detected settings file "C:\Users\Sprinter\AppData\Local\Temp\DPs_Settings.ini".
2008-02-21 16:23:35 : <INIT> Windows XP Home Edition -  OEM SP2 detected.
2008-02-21 16:23:35 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2008-02-21 16:23:35 : <INIT> Imported settings from settings file.
2008-02-21 16:23:35 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2008-02-21 16:23:36 : <PREP> Removed all attributes from \I386.
2008-02-21 16:23:36 : <PREP> Created a backup of \I386\winnt.sif.
2008-02-21 16:23:36 : <PREP> Created a backup of \I386\txtsetup.sif.
2008-02-21 16:23:36 : <PREP> Created a backup of \I386\dosnet.inf.
2008-02-21 16:23:36 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2008-02-21 16:23:36 : <SLIP> Created necessary directory structure for method 2.
2008-02-21 16:23:37 : <SLIP> Copied files necessary for method 2.
2008-02-21 16:23:37 : <SLIP> Extracted files necessary for method 2.
2008-02-21 16:23:38 : <SLIP> Created \I386\presetup.cmd file.
2008-02-21 16:23:38 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2008-02-21 16:23:38 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2008-02-21 16:23:48 : <SLIP> Copied DriverPacks to \OEM.
2008-02-21 16:23:48 : <SLIP> Updated \I386\svcpack.inf file to support KB888111 and KB921401.
2008-02-21 16:23:50 : <SLIP> Updated \I386\txtsetup.sif file to support KB888111.
2008-02-21 16:23:51 : <SLIP> Updated \I386\dosnet.inf file to support KB888111.
2008-02-21 16:23:52 : <SLIP> Updated \I386\dosnet.inf file to support KB921401.
2008-02-21 16:23:52 : <SLIP> Updated \I386\winnt.sif to support method 2.
2008-02-21 16:23:52 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2008-02-21 16:23:52 : <SLIP> Updated \$OEM$\cmdlines.txt to execute ROE.exe.
2008-02-21 16:23:52 : <CLNP> Temporary working directory successfully deleted.
2008-02-21 16:23:52 : Program terminated.

-------------------------------------------------------------------------------------------------

Regards,
Chris

Read before you post in my signature below

This is notebook HP530. Windows setup doesn't see any disks. All other driver packs in current versions.

HWIDS below.

===========
PCI devices
===========

PCI\VEN_14E4&DEV_4311&SUBSYS_1364103C&REV_01\4&4878531&0&00E1: Kontroler sieci
PCI\VEN_1524&DEV_1410&SUBSYS_30D5103C&REV_01\4&2EC23395&0&30F0: Kontroler rodzajowy CardBus
PCI\VEN_8086&DEV_1068&SUBSYS_30D5103C&REV_01\4&2EC23395&0&40F0: Intel(R) PRO/100 VE Network Connection
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_E1\3&B1BFB68&0&F0 : Mostek (bridge) Intel(R) 82801 PCI - 2448
PCI\VEN_8086&DEV_27A0&SUBSYS_00000000&REV_03\3&B1BFB68&0&00 : Mobile Intel(R) 945GM/GU/PM/GMS/940GML/943GML and Intel(R) 945GT Express Processor to DRAM Controller - 27A0
PCI\VEN_8086&DEV_27A2&SUBSYS_30D5103C&REV_03\3&B1BFB68&0&10 : Mobile Intel(R) 945 Express Chipset Family
PCI\VEN_8086&DEV_27A6&SUBSYS_30D5103C&REV_03\3&B1BFB68&0&11 : Mobile Intel(R) 945 Express Chipset Family
PCI\VEN_8086&DEV_27B9&SUBSYS_00000000&REV_01\3&B1BFB68&0&F8 : Intel(R) 82801GBM (ICH7-M/U) LPC Interface Controller - 27B9
PCI\VEN_8086&DEV_27C5&SUBSYS_30D5103C&REV_01\3&B1BFB68&0&FA : Intel(R) 82801GBM SATA AHCI Controller
PCI\VEN_8086&DEV_27C8&SUBSYS_30D5103C&REV_01\3&B1BFB68&0&E8 : Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
PCI\VEN_8086&DEV_27CC&SUBSYS_30D5103C&REV_01\3&B1BFB68&0&EF : Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&B1BFB68&0&E0 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
PCI\VEN_8086&DEV_27D2&SUBSYS_00000000&REV_01\3&B1BFB68&0&E1 : Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D2
PCI\VEN_8086&DEV_27D8&SUBSYS_30D5103C&REV_01\3&B1BFB68&0&D8 : PCI Device
PCI\VEN_8086&DEV_27DF&SUBSYS_30D5103C&REV_01\3&B1BFB68&0&F9 : Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
15 matching device(s) found.

Cheers,
Chris