DriverPacks.net Forum - Help, DPsFnshr.exe is not found ... etc

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (Sull) — Fri, 18 Jan 2008 05:43:07 +0000

You must have replied right when I was editing my post above, I never had this problem before when I manually added driver lines to winnt.sif ?

EDIT:

I fixed that issue but now I have others what the heck .. one after another haha

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (OverFlow) — Fri, 18 Jan 2008 05:41:11 +0000

laptops are always a PITA perhaps someone will jump in here and make a suggestion.

did youtry installing with all the packs selected yet?

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (Sull) — Thu, 17 Jan 2008 18:21:45 +0000

I figured out it was "Microsoft UAA Bus Driver for High Definition Audio"not sure why I had issues this time, I know it is not included in SP3

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (OverFlow) — Thu, 17 Jan 2008 07:34:43 +0000

you are most welcome!

most people just add the packs and don't have to worry about it ever again...
that is what we do and why we're here...

if you use the HWID tool in my sig and post your HWID's we may be able to put you over the top...

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (Sull) — Thu, 17 Jan 2008 07:29:45 +0000

Thanks that worked perfect. Now I just have one PCI device to figure out

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (OverFlow) — Thu, 17 Jan 2008 05:14:36 +0000

the reason you are not getting the functionality you are looking for is you have no packs available or selected.
the 3rd party DriverPack are meant to be an add-on to the official packs.
additionally you will not be able to support any HDD controller drivers through the use of 3rd party DriverPack

the disabler and finisher are only called if at least one official pack is slipstreamed.
if i were you i would choose mass storage.

hope that helps

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (Sull) — Thu, 17 Jan 2008 05:03:44 +0000

I searched around but could not find any use full information, so I am posting my log and ini file. First issue is DSPdsblr.exe cannot be found, second DPsFnshr.exe cannot be found, so what executes presetup.cmd ?

2008-01-16 19:59:51 :  DriverPacks BASE 7.05.2 initialized.
2008-01-16 19:59:51 :  Host environment: WIN_2003 Service Pack 2 on X86 CPU.
2008-01-16 19:59:51 :  Created temporary working directory.
2008-01-16 19:59:51 :  Imported proxy settings from Internet Explorer.
2008-01-16 19:59:51 :  Start scanning for DriverPacks for the wnt5_x86-32 platform.
2008-01-16 19:59:51 :  	Detected 3rd party DriverPack(s).
2008-01-16 19:59:51 :  	Finished scanning.
2008-01-16 19:59:51 :  Detected settings file "H:\Documents and Settings\Administrator\Desktop\New Folder\DPs_BASE.ini".
2008-01-16 19:59:51 :  Windows XP Professional -  Retail SP3 detected.
2008-01-16 19:59:51 :  The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2008-01-16 19:59:51 :  Imported settings from settings file.
2008-01-16 19:59:51 :  QuickStream Cache directory not found!
2008-01-16 19:59:51 :   Initialized GUI.
2008-01-16 19:59:51 :   Created a list of all available language files.
2008-01-16 19:59:51 :   Set the last used language, English, as the GUI language.
2008-01-16 20:00:14 :   Saved settings!
2008-01-16 20:00:14 :   Closed GUI.
2008-01-16 20:00:14 :   Selected module: mod_slip_wxp_x86-32_disc_m2.
2008-01-16 20:00:14 :  Removed all attributes from \I386.
2008-01-16 20:00:14 :  Cleaned up \I386\svcpack.inf.
2008-01-16 20:00:14 :  Unslipstreamed KB888111.
2008-01-16 20:00:14 :  Created a backup of \I386\winnt.sif.
2008-01-16 20:00:14 :  Created a backup of \I386\txtsetup.sif.
2008-01-16 20:00:14 :  Created a backup of \I386\dosnet.inf.
2008-01-16 20:00:14 :  Cleaned up \$OEM$\cmdlines.txt.
2008-01-16 20:00:14 :  Created necessary directory structure for method 2.
2008-01-16 20:00:15 :  Copied files necessary for method 2.
2008-01-16 20:00:15 :  Extracted files necessary for method 2.
2008-01-16 20:00:15 :  Created \I386\presetup.cmd file.
2008-01-16 20:00:15 :  Updated \I386\txtsetup.sif to support method 2.
2008-01-16 20:00:15 :  Updated \I386\dosnet.inf to support method 2.
2008-01-16 20:00:15 :  Copied DriverPacks to \OEM.
2008-01-16 20:00:15 :  Updated \I386\winnt.sif to support method 2.
2008-01-16 20:00:15 :  Updated DPsFnshr.ini to disable KTD.
2008-01-16 20:00:15 :  Updated \I386\winnt.sif's GUIRunOnce section.
2008-01-16 20:00:15 :  Slipstream finished in 1 seconds.
2008-01-16 20:00:17 :  Temporary working directory successfully deleted.
2008-01-16 20:00:17 : Program terminated.

[General]
; preferred language
prefLang	= "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons	= "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI		= "yes"


[Settings]
; disc/bartpe/multibootDisc
instPlatform	= "disc"
; trailing backslash is allowed, but not necessary
location	= "F:\Project TABLETXP_UX\XP_UXsp2test"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks	= "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod	= "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod	= "GUIRunOnce"


; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD		= "false"
; , to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation	= "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC		= "yes"


; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DPs_3rd_party	= "yes"
DP_MassStorage_textmode = "no"


; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl		= "CCC"

Hopefully I have done what is asked ?

Re: Help, DPsFnshr.exe is not found ... etc

null@example.com (OverFlow) — Thu, 17 Jan 2008 03:45:03 +0000

Hi Sull,
Thanks for posting here at DriverPacks
the second two links in my sig please.

Help, DPsFnshr.exe is not found ... etc

null@example.com (Sull) — Thu, 17 Jan 2008 03:14:54 +0000

Hi I am new, please forgive me if this is in the wrong spot

I made a driver pack with all the included drivers I need, followed a guide here at the forum, what ever disables the windows I think for driver signing right at the beginning of a XP installation cannot be found in C:\, also DPsFnshr.exe cannot be found closer to the end of the installation, should I be placing these files somewhere or should they be extracted automatically ?

Sorry hopefully this makes sense.

Thanks

Sull