DriverPacks.net Forum - Ati radeon 2400HD -"Windows Help There is not enough memory available"

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-17T01:24:09Z

I agree too.

I sometimes do not want to undo the fine tuning.

There is a lot of Legacy in DriverPacks. I doubt there is an active current team member whom has all original drivers on his drive. Are there any?
I don't have all.
There are quite a few members with more expertise than I have, and I think they all know we have to make choices every now and then.
Jeff has summarised how we have to make our choices more than once.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-17T00:37:12Z

I Agree... ;D

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T23:01:24Z

after the few tests I did without sound DriverPacks and suitable hardware, I think samlab has the key to conflict.
HDMI in video cards could be clashing with sound.

Erik, when I tried to corroberate that, I used low cost motherboards and graphics cards and I knew that the driver CD supplied with the mobo had a bad install routine because it clashed with its own IGP, and no third party graphics card was plugged.

when I used other testbeds, I saw that some ati drivers (supplied on the CD) had problems with hdmi.
What I am saying is that we see a mess, and it is not your/my/our fault.

Nvidia graphics and ATI with TV and sound capability will (this is for real.. it is a statement) clash with things like realtek.
We could have a perfect DriverPacks combo for 99.98 percent of users, and the next update in any of the main DriverPacks or third party (third party like modems with sound/and TV with sound..) can and (a prediction; they will) introduce issues to 20 percent.

edit;
HDaud sound capability and HDMI will, in my opinion, be an issue because the manufactors don't get their drivers right, and they seldom (if ever) look at conflict issues (with/against other manufactors // OEM implentations.) like we had to do...

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T15:51:49Z

To clarify, is the aticcp.exe a silent installer of some sort? It runs briefly and I do not get any error messages, but when I manually try to run atiptaxx.exe from Program Files I get the same error ("The ATI Control Panel failed to initialize because no ATI driver is installed, or ATI driver is not working properly. The ATI Control Panel will now exit."). Rebooting makes no difference. Do you want me to uninstall the CCP before and then run it?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T15:28:52Z

Thanks for the update. I'm aware of the AVIVO codec problem and I'm building a new DP that fixes it.
I wasn't aware of any problems with the control panel though.
It's possible the botched AVIVO install borked the control panel installer since both use the built-in windows installer. I'll look into it.
Can you decompress the G_A dp and double click the d\g\a1\aticcp.exe file to verify it works on it's own?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T14:14:01Z

Nope...

just wanted to make sure we were all on the same page

Thanks for responding

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T14:12:57Z

OverFlow wrote:

You ABSOLUTELY must have .NET installed or the control panel will fail to install
you can select None for the control panel option in base to verify this is the problem

I have the second option selected (ATI Catalyst Control Panel) which does not state that .NET is required (the first option, ATI CCC, does). Does the CCP also require the .NET FW?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T14:04:17Z

You ABSOLUTELY must have .NET installed or the 'ATI Control Center' will fail to install

if you are installing the the 'ATI Control Panel' then .net is not required

you can select None for the control panel option in base to verify this is the problem (or bypass it)

i did see you were referencing the ati cp but felt the need to make sure it was not the ati cc we were discussing

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-16T12:11:38Z

I let the unattended go as I left yesterday, came in today, logged in, greeted by an ATI error.

Windows is in the "Personalized Settings, Setting up personalized settings for: Windows Desktop Update"
The error is:
ATI AVIVO Codecs
Error 1904.Module C:\Program Files\Common Files\ATI Technologies\Multimedia\atimcenc.dll failed to register. HRESULT -2147010895. Contact your support personnel. Cancel/Retry/Ignore.

Retry fails, ignore brings up another for atidvcr.dll, then atixcode.dll, then it completes. Then the Desktop finally loads and I'm greeted with "The ATI Control Panel failed to initialize because no ATI driver is installed, or ATI driver is not working properly. The ATI Control Panel will now exit." Indeed, the adapter has no drivers. Arg.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-15T22:06:07Z

tbkdan wrote:

edit: lol @ "Where did you get that?"

Yeah, Bâshrat the Sneaky certainly has a sense of humour, hasn't he?

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-15T19:53:34Z

Sure, but it'll have to wait till tomorrow to let you know how it went (leaving in 30 minutes). Thanks for the help

edit: lol @ "Where did you get that?"

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-15T19:52:05Z

Hmmm.
Can you try this test pack?
http://dev.driverpacks.thesneaky.com/dr … 32_806G.7z
You might get an error with the AVIVO codecs (I'm working on a fix already), but everything else should be good to go.

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-15T17:22:29Z

Using Process Explorer, the winhlp32.exe process is being spawned off the atiptaxx.exe process; killing it makes the error message go away.

As for the card, no branding on it (half-height PCIE card for the mini Dell case). One label (green) has P/N 102A7710920 00001. Another has ATI-102-A771(B) which, after a google, looks exactly like this and sounds like it's an X1300 from this site. Let me know if I can be of any more help (I can boot up a liveCD and get the PCI ID if you want).

Thanks for the welcome

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-15T17:05:34Z

Can you explain exactly how you know it's being caused by atiptaxx.exe (Task Manager mem usage?)

Dell-branded graphics cards have been causing us headaches. Can you check the graphics card itself for a "Dell" logo?
Thanks for reporting, and welcome to DriverPacks!

Re: Ati radeon 2400HD -"Windows Help There is not enough memory available"

2008-07-15T15:17:24Z

I am now getting this message on my Dell Optiplex 745 (Radeon X1300/X1550 Series). I know it's being caused by atiptaxx.exe and it happens under all users at logon. I used DriverPack Base 8.05 to slipstream 8.04 graphics drivers (method 2, no KTD, QSC yes) on an XP Pro SP3 unattended CD (created with nLite). If you need any more info, let me know. Thanks for the great software, it's been working great otherwise!