DriverPacks.net Forum - [BUG] Promise SATA300 TX 4302 not recognized

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-23T03:14:18Z

This issue should be fixed in our next pack.

-[P7] Promise SATAII150/SATA300 TX from 06/30/2005, 1.00.0.33 to 05/16/2007, 1.00.0.39

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-10T23:38:30Z

We can deal with that in the mass storae pack i belive.
We will take a look at it ...

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-10T17:21:40Z

You wrote:

Can you try again, downgrade ULSATA2.sys only. Do you get acess to TX4302?

Yes this worked. I did not copy the INF or the Dll and rolled back to "SATA300TX Series Windrv 1.00.0.39"
and I'm able to see the hard drives attached to the Promise card.

I'll just have to remember to manually roll back that driver when I make my BartPE disk.

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-05T15:09:20Z

Rodommoc wrote:

For some reason the DLL & INF are not being copied during BartPE build.

That's fine. A massstorage driver dosn't require *.inf or *.dll at BartPE.

Also ULSATA2.sys new version does not work.

I understand: the new driver dosn't support old hardware.

I can manually copy the 3 files after the BartPE build then use Bart PE to create the ISO.

Can you try again, downgrade ULSATA2.sys only. Do you get acess to TX4302?

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-05T14:21:00Z

These drivers are in the MassStorage driverpack. For some reason the DLL & INF are not being copied during BartPE build. Also ULSATA2.sys
new version does not work. I can manually copy the 3 files after the BartPE build then use Bart PE to create the ISO.

This works but it should work from the MassStorage driverpack.

Thanks

Mark

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-03T19:03:26Z

you need to add the F6 drivers into a subfolder of the \Drivers\ folder and let the builder add them for you
manualy adding them will not work

Re: [BUG] Promise SATA300 TX 4302 not recognized

2009-03-03T14:49:18Z

I'm still working on getting the Promise STAT 300 TX4302 working with the Latest DPBase & MassStorage driverpack.

I got the driver working by
Running DPBase and making the plugin containing, MassStorage, LAN, WLAN.
running BartPE Builder.
Then I copied:
ULSATA2.sys
Ulutil2.dll
UlSATA2.Inf

to where they belong.

Ulutil2.dll
UlSATA2.Inf
dont exist in the BartPE directory.

Im thinking that is why it does not work.

I'll keep working on it.

Thanks

Re: [BUG] Promise SATA300 TX 4302 not recognized

2008-11-26T19:32:26Z

ISO from Microsoft of XP with SP3.
I use Reatogo to make my BartPE cd.
My plugins:
C:\cdinst\REATOGO-240\plugin\AUTOHELP
C:\cdinst\REATOGO-240\plugin\AVPersonal8
C:\cdinst\REATOGO-240\plugin\DRHARD_autoHelp
C:\cdinst\REATOGO-240\plugin\DriverPacks.net
C:\cdinst\REATOGO-240\plugin\EasyRecovery_autoHelp
C:\cdinst\REATOGO-240\plugin\ERDC2005
C:\cdinst\REATOGO-240\plugin\ghost32_autoHelp
C:\cdinst\REATOGO-240\plugin\MSKeyViewerPlus_autoHelp
C:\cdinst\REATOGO-240\plugin\NAV_autoHelp
C:\cdinst\REATOGO-240\plugin\NDD_autoHelp
C:\cdinst\REATOGO-240\plugin\PmagicP+N_autoHelp
C:\cdinst\REATOGO-240\plugin\stinger_autoHelp
C:\cdinst\REATOGO-240\plugin\sysinttools
C:\cdinst\REATOGO-240\plugin\z-Custom

Thanks
Mark

Re: [BUG] Promise SATA300 TX 4302 not recognized

2008-11-26T01:01:14Z

Hi Rodommoc, can you please which OS and Service Pack you use as source in your BartPE ? Thanks you.

Re: [BUG] Promise SATA300 TX 4302 not recognized

2008-11-25T14:33:26Z

This Promise TX4 T4302 is not working anymore.

HWID: Promise STAT300 TX4 PCI\VEN_105A&DEV_3D17&SUBSYS_3D17105A&REV_02\3&267A616A&0&58

The HWID is comig up as a TX4 but it is a T4302.

HWID in Device Manager in Vista:
PCI\VEN_105A&DEV_3D17&SUBSYS_3D17105A&REV_02
PCI\VEN_105A&DEV_3D17&SUBSYS_3D17105A
PCI\VEN_105A&DEV_3D17&CC_018000
PCI\VEN_105A&DEV_3D17&CC_0180

You had it working in previous DriverPacks but I'm using:
DP_MassStorage_wnt5_x86-32_805

Im creating a BartPE disk. When I boot from the CD or Thumbdrive The Promise card has no driver.

Thanks
Mark

Re: [BUG] Promise SATA300 TX 4302 not recognized

2007-12-04T03:33:15Z

Thank you for the report.

Re: [BUG] Promise SATA300 TX 4302 not recognized

2007-12-03T22:21:32Z

It works!!!!

And it seems to have faster throughput.

Thank You

Re: [BUG] Promise SATA300 TX 4302 not recognized

2007-12-03T14:52:30Z

I had no time to run a basic test, and I had forgotten to rename the ulsata2.sys to sata4302.sys in \PB.
Sorry.

new testfile
http://dev.driverpacks.thesneaky.com/dr … 2_test2.7z

Re: [BUG] Promise SATA300 TX 4302 not recognized

2007-12-03T14:14:34Z

I
Should have put in the reply

I deleted the old Driverpack.net plugin and started from scratch

Thanks again

Re: [BUG] Promise SATA300 TX 4302 not recognized

2007-12-03T14:12:53Z

I'm trying the test DP and getting this error:

Critical Error
Failed to CAB compress C:\Driverpack\tmp\DPMtemp\D\M\PB\sata4302.sys to
C:\REATOGO-240\plugin\DriverPacks.net\MassStorage\wnt5\SATA4302.sy_

Thasks for your assistance, hopefully we can get this working..
Mark