DriverPacks.net Forum - Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Mon, 24 Sep 2007 14:07:22 +0000

OK, I did a clean rebuild from scratch and tested it on MS Virtual PC 2007 and it seems to be OK.
Too bad they do not have a way to configure specific hardware in Virtual PC.

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Mon, 24 Sep 2007 02:25:54 +0000

Hi
yes.. move approx 1.4 giga uncompressed to windows\drivers\dp is pretty quick, and then let windows know where the INF files are and what they are for takes a while (doPNF).

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Sun, 23 Sep 2007 19:17:01 +0000

OK, it installs with no errors, but I do notice that it take about 5 minutes on KTD and finisher before the first bootup.
I don't ever remember that screen taking that long before.
Is that within the range of 'normal'?

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Sun, 23 Sep 2007 18:02:18 +0000

three folders were removed, others got added, so yes, this is normal.

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Sun, 23 Sep 2007 17:07:19 +0000

I notice that build 7094 is about 400KB smaller than 7091.
Is that correct?

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Sun, 23 Sep 2007 15:35:54 +0000

HOLY CRAP Jaak!
I just noticed the part about Quick Stream Cache
That likely explains A LOT of the problems that I started having with the Bâshrat the Sneaky driverpacks for the last several months.

I'm going to start over from scratch and enable Quick Stream Cache and see if some of my problems don't mysteriously go away.

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Sun, 23 Sep 2007 14:48:44 +0000

SWEET!
I'll try it again.
Thanks for hanging with me on this Jaak.

Yes, I always do it with QSC disabled by default since the installer says that is reccomended for method 2.

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Sat, 22 Sep 2007 21:43:39 +0000

hi
ran tests in virtual PC2007 until it loaded and goes past T39

txtmode error (percsas error) fixed by INI edit.

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Sat, 22 Sep 2007 20:11:14 +0000

OK, 70904 is up, with the change in INI.

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Sat, 22 Sep 2007 20:07:10 +0000

weird, txtsetup.sif is OK here, and percsas.sy_ is cabbed into i386.

Did you have QSC ON?
There are some bugs when it is OFF. (in Method 2 too.)

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Sat, 22 Sep 2007 19:55:55 +0000

I am Not sure this driver works for XP.

I'll look in a txtsetup.sif and see what that says.

I can also change the INI for [D-3]

exc_skipIfOS= instead of exc_disableIfOS=

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Sat, 22 Sep 2007 19:47:47 +0000

Right after text mode, I get a mesage:

The file percsas.sys cannot be found
Press any key to continue

when I hit any key, I get told that setup has failed

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Sat, 22 Sep 2007 19:20:46 +0000

Jaak wrote:

hi
http://forum.driverpacks.net/viewtopic.php?id=2039

Got it!

I'll build this and let you know.
Thanks again!

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jaak) — Fri, 21 Sep 2007 22:07:29 +0000

http://forum.driverpacks.net/viewtopic.php?id=2039

Re: Blue Screen With Adaptec 1205SA - DriverPack Thinks it's a SiL 3112

null@example.com (Jimbo) — Mon, 17 Sep 2007 22:51:58 +0000

Sure, no problem.
If you can use any of my info for the next update, let me know and I'll test it out on the machine to see if it works OK.
Just remember that now I have a card that is flashed to the latest BIOS provided by SiL for the 3112 and NOT the original Adaptec 1205SA BIOS.
I don't know if that makes a difference or not but if anyone out there has an Adaptec 1205SA, they probably should flash it to BIOS 4.2.83 anyways, using the DOS method I described above.
That BIOS, and the BIOS update utility for DOS, are available here: http://www.siliconimage.com/support/sup … sid=0&