DriverPacks.net Forum - Bsod on soundmax

Re: Bsod on soundmax

null@example.com (zveljkovic) — Sat, 09 Jun 2007 15:34:05 +0000

ristech wrote:

EDIT2: Ok I deleted the QSC and re-slipstreamed it into the package and that seemed to work. The machine is up and running with a proper driver installed. Thanks for all your help in this matter.

Was driver installed during setup or in Windows ?
I have similiar problem...

Re: Bsod on soundmax

null@example.com (ristech) — Fri, 08 Jun 2007 15:30:30 +0000

Ok I tried commenting out what you suggested in the file and it still gives me blue screens during install.. portcls.sys

EDIT: Here's my method of doing it: Unpacked the 7.05 sound driver A pack, modified the INF file and commented out the line, repacked it using the original name (keeping a backup of the original) then used DP_Base to slipstream it into my image and pushed it out using RIS to a Vectra test machine. Its obvious that its not working this way, but should I have cleared my QSC for Sound pack A before I slipstreamed it using the modified file? Or will that not make a difference?

EDIT2: Ok I deleted the QSC and re-slipstreamed it into the package and that seemed to work. The machine is up and running with a proper driver installed. Thanks for all your help in this matter.

Re: Bsod on soundmax

null@example.com (Major) — Wed, 06 Jun 2007 06:37:38 +0000

Ok, i think there is no need to see in the HP website, knowing the motherboard and chipset of the PC you can download the apropiate driver from their manufacturer.

Re: Bsod on soundmax

null@example.com (ristech) — Wed, 06 Jun 2007 02:54:12 +0000

Well here's the thing: there are no drivers on the HP website that I could find for that machine so I wasn't really sure what the driver was until I got it working. When I get in tomorrow at work I'll try out what you suggested and get back to you.

Re: Bsod on soundmax

null@example.com (Major) — Wed, 06 Jun 2007 00:14:02 +0000

It seems it has found the HWID "PCI\VEN_8086&DEV_2415" in various files (Realtek, intel ac97, soundmax). I think you have to exclude that HWID from the Realtek .inf file "D\S\R\1\Alcxau.inf" and do a test to see if it takes the suitable sound driver.
Regarding, which driver is the suitable, i refer to the drivers included in the webpage of the manufacturer?

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 20:54:38 +0000

The motherboard of the PC is an Intel board (I think).. I can't check right now because its at my work. The model of the computer is a HP Vectra VL400.

Here is the link for my log:
http://rapidshare.com/files/35448327/setupapi.log.html

Re: Bsod on soundmax

null@example.com (Major) — Tue, 05 Jun 2007 20:35:26 +0000

Can you please upload the files Setupapi.log to any server like rapidshare, because is so long, and delete those posts of setupapi.log
Would you tell me pleas the motherboard of your PC?

Thanks very much.

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 13:56:12 +0000

After playing with the machine a little bit, I managed to get the drivers to install.. however I never installed any software. I went into safe mode and un-installed the hardware, then rebooted into regular mode. The hardware "device" came up as a sound driver for the Intel 828011AA/AB

EDIT: Actually, I got it to work by installing the Realtek AC'97 software in safe mode, rebooting back into safe mode, uninstalling it, then rebooting into normal mode and the sound installed properly.

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 12:03:49 +0000

Here is the DPSFNSHER.LOG file as well:

2007-05-31 14:20:04 :  DriverPacks Finisher 7.05.2 initialized.
2007-05-31 14:20:04 :  Splash screen initialized.
2007-05-31 14:20:04 :  Detected platform wnt5_x86-32.
2007-05-31 14:20:04 :   Start logging of constants used in this program:
2007-05-31 14:20:04 :   	$_DEBUG: True
2007-05-31 14:20:04 :   	$_DPSTMP: C:\tmp
2007-05-31 14:20:04 :   	$_LOGFILE: C:\WINNT\DPsFnshr.log
2007-05-31 14:20:04 :   	$_NF: not found
2007-05-31 14:20:04 :   	$_SETTINGSFILE: C:\DPsFnshr.ini
2007-05-31 14:20:04 :   	$_SPLASHSCREEN: True
2007-05-31 14:20:04 :  Start logging of system variables available for use by the exceptions:
2007-05-31 14:20:04 :  	%finisherdir% = C:
2007-05-31 14:20:04 :  	%systemdrive% = C:
2007-05-31 14:20:04 :  	%systemroot% = C:\WINNT
2007-05-31 14:20:04 :  	%windir% = C:\WINNT
2007-05-31 14:20:04 :  	%programfiles% = C:\Program Files
2007-05-31 14:20:04 :  	%dpsroot% = 
2007-05-31 14:20:04 :  	%dpstmp% = C:\tmp
2007-05-31 14:20:04 :  Start logging of the HWIDs for relevant devices present in this system.
2007-05-31 14:20:04 :  1. ACPI devices

ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\INT0800\4&264480D3&0                                   : Intel(r) 82802 Firmware Hub Device
ACPI\PNP0000\4&264480D3&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&264480D3&0                                   : System timer
ACPI\PNP0200\4&264480D3&0                                   : Direct memory access controller
ACPI\PNP0303\11                                             : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0400\2                                              : Printer Port (LPT1)
ACPI\PNP0501\0                                              : Communications Port (COM1)
ACPI\PNP0501\1                                              : Communications Port (COM2)
ACPI\PNP0700\0                                              : Standard floppy disk controller
ACPI\PNP0800\4&264480D3&0                                   : System speaker
ACPI\PNP0A03\2&DABA3FF&0                                    : PCI bus
ACPI\PNP0A05\4&264480D3&0                                   : Generic Bus
ACPI\PNP0B00\4&264480D3&0                                   : System CMOS/real time clock
ACPI\PNP0C02\1F                                             : Motherboard resources
ACPI\PNP0C04\4&264480D3&0                                   : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0F13\10                                             : PS/2 Compatible Mouse
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : Advanced Configuration and Power Interface (ACPI) PC
20 matching device(s) found.

2007-05-31 14:20:04 :  2. PCI devices

PCI\VEN_102B&DEV_0521&SUBSYS_CA6C102B&REV_03\4&5F3FF6B&0&0008: Matrox Millennium G250 AGP 
PCI\VEN_10B7&DEV_9200&SUBSYS_100010B7&REV_74\4&24AB0D93&0&10F0: 3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX)
PCI\VEN_8086&DEV_1130&SUBSYS_00000000&REV_02\3&61AAA01&0&00 : PCI standard host CPU bridge
PCI\VEN_8086&DEV_1131&SUBSYS_00000000&REV_02\3&61AAA01&0&08 : PCI standard PCI-to-PCI bridge
PCI\VEN_8086&DEV_2410&SUBSYS_00000000&REV_02\3&61AAA01&0&F8 : Intel(r) 82801AA LPC Interface Controller
PCI\VEN_8086&DEV_2411&SUBSYS_24118086&REV_02\3&61AAA01&0&F9 : Intel(r) 82801AA Bus Master IDE Controller
PCI\VEN_8086&DEV_2412&SUBSYS_24128086&REV_02\3&61AAA01&0&FA : Intel(r) 82801AA USB Universal Host Controller
PCI\VEN_8086&DEV_2413&SUBSYS_24138086&REV_02\3&61AAA01&0&FB : Intel(r) 82801AA SMBus Controller
PCI\VEN_8086&DEV_2418&SUBSYS_00000000&REV_02\3&61AAA01&0&F0 : Intel(r) 82801AA PCI Bridge
9 matching device(s) found.

2007-05-31 14:20:05 :  3. HDAUDIO devices

No matching devices found.

2007-05-31 14:20:05 :  4. USB devices

USB\ROOT_HUB\4&12F0DD96&0                                   : USB Root Hub
1 matching device(s) found.

2007-05-31 14:20:05 :  Logging of HWIDs complete.
2007-05-31 14:20:05 :  No .ini files found in "C:" for the wnt5_x86-32 platform!
2007-05-31 14:20:05 :  Processed settings.
2007-05-31 14:20:05 :   Content of $exceptions array: (custom array output)
2007-05-31 14:20:05 :       $exceptions = array(
2007-05-31 14:20:05 :       )
2007-05-31 14:20:05 :   Content of $exceptions array: (raw array contents)
2007-05-31 14:20:05 :       $exceptions = array(
2007-05-31 14:20:05 :           [0] =>
2007-05-31 14:20:05 :               [0] => 0
2007-05-31 14:20:05 :               [1] => 0
2007-05-31 14:20:05 :               [2] => 
2007-05-31 14:20:05 :               [3] => 
2007-05-31 14:20:05 :               [4] => 
2007-05-31 14:20:05 :               [5] => 
2007-05-31 14:20:05 :               [6] => 
2007-05-31 14:20:05 :               [7] => 
2007-05-31 14:20:05 :           )
2007-05-31 14:20:05 :       )
2007-05-31 14:20:05 :  No exceptions left, skip immediately to KTD.
2007-05-31 14:20:05 :   KTD will not be applied, the DriverPacks will be deleted.
2007-05-31 14:20:17 :  Deleted the DriverPacks, which were located in "C:\D".
2007-05-31 14:20:17 :  Deleted "C:\DPsFnshr.ini"!
2007-05-31 14:20:17 :  Deleted "C:\devcon.exe"!
2007-05-31 14:20:17 :  Deleted "C:\makePNF.exe"!
2007-05-31 14:20:17 :  Deleted "C:\pmtimer.exe"!
2007-05-31 14:20:17 :  Deleted "C:\*.ins"!
2007-05-31 14:20:17 :  Deleted "C:\DSPdsblr.exe"!
2007-05-31 14:20:17 :  Deleted "C:\mute.exe"!
2007-05-31 14:20:17 :  Added new value to the RunOnce key in the registry: the DriverPacks Finisher itself will get deleted after the next reboot.
2007-05-31 14:20:17 : Program terminated.

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 11:33:09 +0000

[Deleted]

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 11:32:16 +0000

[Deleted]

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 11:30:26 +0000

[Deleted]

Re: Bsod on soundmax

null@example.com (ristech) — Tue, 05 Jun 2007 11:28:54 +0000

I cannot use the save_hwids program because all the links are dead. The HWID that I had found for that device I found through winmsd which I ran through the run box.

PCI\VEN_8086&DEV_2415&SUBSYS_1249103C&REV_02\3&61AAA01&0&FD

[Deleted]

Re: Bsod on soundmax

null@example.com (Major) — Tue, 05 Jun 2007 10:46:10 +0000

Ok, attach me please the file setupapi.log, you can find it in the directory WINDOWS, and also the HWID. we will see how many files .inf have that HWID
Thanks

Re: Bsod on soundmax

null@example.com (ristech) — Mon, 04 Jun 2007 18:14:30 +0000

I get the same problem on a machine I'm working on right now, with a portcls.sys error. I've done some research and found that this is the device ID for the sound card of a similar machine:

PCI\VEN_8086&DEV_2415&SUBSYS_1249103C&REV_02\3&61AAA01&0&FD

If I have the sound card enabled during windows install, it hangs with that error, if I disable it for the setup, then enable it afterwards, it will install partly as a realtek AC'97 device and crashes the system.