Issue is solved in DP 7.06.1 ! Thanks guys for your help !
Alex
]]>does the broadcom driver work right now?
Note; the HDA issue probably deserves another topic.
]]>P.s. the HD audio yellow exclam, without prior manual addition of 888111, is for h/w 8086 284B (Intel Corporation 82801H (ICH8 Family) HD Audio Controller ) - this has always been an issue though, still seems problem of RyanVM and Driverpacks mix.
]]>I am glad I just found this thread I have been going mad trying to figure out what was going on with 745's not working with latest packs.
I had no problem with 520's or 745's with the packs from a month or so agoI am getting yellow exclams now on the 745's for graphics and netcard (not tried 520)
Broadcom is 14E4 167A and Intel graphics 8086 2992 - both worked fine before, now dont.[Incidently I still have to manually apply KB888111 to get the HD audio working- thats using latest RyanVM and Driverpacks from here]
chud
Hi chud
What is the language of your Windows source?
Were you using the latest DriverPacks?
(We should have logs to look at, and I suggest you post them.)
I am getting yellow exclams now on the 745's for graphics and netcard (not tried 520)
Broadcom is 14E4 167A and Intel graphics 8086 2992 - both worked fine before, now dont.
[Incidently I still have to manually apply KB888111 to get the HD audio working- thats using latest RyanVM and Driverpacks from here]
chud
]]>i know there's a fresh new version of DriverPack Lan (7.06.1) but i wanted to report that the yellow mark has disapeared when I used DriverPack Lan 7062Test
Hardware : HP 6710b, Broadcom NetLink
HWID : PCI\VEN_14E4&DEV_1693&SUBSYS_30C0103C&REV_02\4&227633DA&0&00E2
Hope that the final 7.06.1 will act that way ...
]]>http://users.pandora.be/jtdoom/DP_LAN_w … 1_TEST1.7z
EDIT, NOTE, dupe HWIDs were not edited out, but PnP ought to handle that fine.
]]>Another check reveals it will have to be a third folder, because the system file is different as well.
I will have to undo the edit in B\1, and add a B\3
if you need a solution pdq, put official broadcom in B\1 (I changed the INF, and the official has to be used)
put the DELL in B\3
undo your INI edit
then repack, and use your custom lanpack.
I meant the INF of the driver, not the driverpack's INI.
What you did was adding an exception to an NVidia LAN driver, which is not going to work for broadcom.
I just downloaded the DELL driver.
THANKS
I'll look into this one, and may find a solution. (I am subscribed to this thread now.)
2. Ive added the line in RED to the ini file in the LAN pack but that didnt work either. Did i add the line correctly jtdoom? it wasnt to clear on the above post.
[DriverPack]
platform = "wnt5_x86-32"
name = "LAN"
rootDir = "D\L"
; OPTIONAL
classes = "Net"
driverCount =
decompSize =
compSize =
[NV-3]
; REQUIRED
exc_count = 1
; OPTIONAL
exc_1_tagFiles = 0
exc_1_+hwids = 1
exc_1_+hwid1 = "PCI\VEN_10DE&DEV_00DF&SUBSYS_E0001458&REV_A2"
exc_1_+hwid2 = "PCI\VEN_10DE&DEV_00DF&SUBSYS_02501462&REV_A2"
exc_1_+hwid3 = "PCI\VEN_10DE&DEV_00DF&SUBSYS_A5511297&REV_A2"
exc_1_+hwid4 = "PCI\VEN_14E4&DEV_1677&SUBSYS_01AD1028&REV_01"
exc_1_-hwids = 0
exc_1_+infFiles = 0
exc_1_-infFiles = 0
exc_1_commands = 2
exc_1_command1 = "%SystemDrive%\devcon.exe update %DPSROOT%\D\L\NV\3\nvnetbus.inf "PCI\VEN_10DE&DEV_00DF&SUBSYS_*""
exc_1_command2 = "%SystemDrive%\devcon.exe update %DPSROOT%\D\L\NV\3\nvenetfd.inf "{1a3e09be-1e45-494b-9174-d7385b45bbf5}\NVNET_DEV00DF""
Dell network driver for GX520, 620 & precision 380 can be dowloaded here
]]>