a new mass storage 70418 for TESTING purposes will be uploaded
http://rapidshare.com/files/26650993/DP … 2_70418.7z

I read a report that a lot of drivers are commented out in textmode.sif and dosnet.inf, and I could reproduce that in our test version..
those that should work for XP are disabled by lines intended for w2k or 2k3, and I need to look at that when I use official release.

the workaround I found for the DS3 is to set ms_count = 0 instead of 1 in the Driver pack ini file of the mass storage text mode driver pack for the JMircon driver.
I also updated the driver for the Intel ICH8R with a modified one that enables AHCI on ICH8 as well as on ICH8R.

With all this the installation went fine and now this new config rocks !

Nono

reini.m

Thanks for your work,

reini.m

jmicron was reported to cause conflicts, the files were updated and changed load order
generics that were seen as causing conflicts were killed, and specifics only were kept in place..

what Vier says, is also a workaround
when you rebuild, after you have edited the INI in QSC, that edit in QSC will be used to as textmode filters.

if you want to unpack mass stor in an empty folder to make your own mass stor pack, you can, you will find an INI, you can edit it, and repack INI and D folder, but make sure to give it a current date name so that when you use it, it will be seen as a version. Base checks legit version names.
IF YOU KEEP SAME NAME, then DELETE QSC FOLDER.
704 can become 70417 and it will be accepted as legit version ''where did you get this", can be ignored.

I'm trying to install Windows on a Gigabyte DS3 for a friend of mine and I'm experiencing something that looks lime the same problem.
If I configure the drive in AHCI and connect to the Intel Port or the Gigabyte One (JMicron), I face a BSOD just before the partitionning screen.
I'll try the manipulation of the ms_count tonight and post the result.

Thanks for your (unknown) help !!!

Nono

You have two possibilities for change (for ICH5R it's works 2 method for detect my RAID system) :

[AD-A]
ms_count             = 0
ms_1_deviceName        = "Adaptec Embedded Serial ATA HostRAID Controller"
ms_1_tag            = "aarich"
ms_1_sysFile        = "aarich.sys"
ms_1_hwids            = "PCI\VEN_8086&DEV_24DF,PCI\VEN_8086&DEV_24DF&SUBSYS_498015D9&REV_02,PCI\VEN_8086&DEV_25B0"
ms_1_isBusExtender    = false
ms_1_exc_disableIfOS= "w2k"

Or 2)

[AD-A]
ms_count             = 1
ms_1_deviceName        = "Adaptec Embedded Serial ATA HostRAID Controller"
ms_1_tag            = "aarich"
ms_1_sysFile        = "aarich.sys"
ms_1_hwids            = "PCI\VEN_8086&DEV_24DF&SUBSYS_498015D9&REV_02"
ms_1_isBusExtender    = false
ms_1_exc_disableIfOS= "w2k"

I've read your post before, and having no luck trying method 2, how could I set ms_count =0 in the ini?

You have two possibilities, Edit ini file and change :

1)  ms_count = 1 To ms_count = 0

Or

2)
ms_1_hwids            = "PCI\VEN_8086&DEV_24DF,PCI\VEN_8086&DEV_24DF&SUBSYS_498015D9&REV_02,PCI\VEN_8086&DEV_25B0"

To
ms_1_hwids            = "PCI\VEN_8086&DEV_24DF&SUBSYS_498015D9&REV_02"

I know a conflict exist with this driver and AD-A driver !

I have a problem with detect my ICH5R : http://forum.driverpacks.net/viewtopic.php?id=1420

2007-04-06 04:40:47 : <INIT> DriverPacks Finisher 7.04 initialized.
2007-04-06 04:40:47 : <INIT> Splash screen initialized.
2007-04-06 04:40:47 : <INIT> Detected platform wnt5_x86-32.
2007-04-06 04:40:47 : <DBG>  Start logging of constants used in this program:
2007-04-06 04:40:47 : <DBG>      $_DEBUG: True
2007-04-06 04:40:47 : <DBG>      $_DPSTMP: C:\tmp
2007-04-06 04:40:47 : <DBG>      $_LOGFILE: C:\WINDOWS\DPsFnshr.log
2007-04-06 04:40:47 : <DBG>      $_NF: not found
2007-04-06 04:40:47 : <DBG>      $_SETTINGSFILE: C:\DPsFnshr.ini
2007-04-06 04:40:47 : <DBG>      $_SPLASHSCREEN: True
2007-04-06 04:40:47 : <INIT> Start logging of system variables available for use by the exceptions:
2007-04-06 04:40:47 : <INIT>     %finisherdir% = C:
2007-04-06 04:40:47 : <INIT>     %systemdrive% = C:
2007-04-06 04:40:47 : <INIT>     %systemroot% = C:\WINDOWS
2007-04-06 04:40:47 : <INIT>     %windir% = C:\WINDOWS
2007-04-06 04:40:47 : <INIT>     %programfiles% = C:\Program Files
2007-04-06 04:40:47 : <INIT>     %dpsroot% =
2007-04-06 04:40:47 : <INIT>     %dpstmp% = C:\tmp
2007-04-06 04:40:47 : <INIT> Start logging of the HWIDs for relevant devices present in this system.
2007-04-06 04:40:47 : <INIT> 1. ACPI devices

ACPI\FIXEDBUTTON\2&DABA3FF&0                                : ACPI Fixed Feature Button
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_0                : Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz
ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_15\_1                : Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz
ACPI\INT0800\2&DABA3FF&0                                    : Intel(R) 82802 Firmware Hub Device
ACPI\PNP0000\4&15F81E4C&0                                   : Programmable interrupt controller
ACPI\PNP0100\4&15F81E4C&0                                   : System timer
ACPI\PNP0200\4&15F81E4C&0                                   : Direct memory access controller
ACPI\PNP0303\4&15F81E4C&0                                   : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
ACPI\PNP0700\4&15F81E4C&0                                   : Standard floppy disk controller
ACPI\PNP0800\4&15F81E4C&0                                   : System speaker
ACPI\PNP0A03\1                                              : PCI bus
ACPI\PNP0B00\4&15F81E4C&0                                   : System CMOS/real time clock
ACPI\PNP0C01\2&DABA3FF&0                                    : System board
ACPI\PNP0C02\1                                              : Motherboard resources
ACPI\PNP0C02\2                                              : Motherboard resources
ACPI\PNP0C02\4                                              : Motherboard resources
ACPI\PNP0C04\4&15F81E4C&0                                   : Numeric data processor
ACPI\PNP0C0C\2&DABA3FF&0                                    : ACPI Power Button
ACPI\PNP0F13\4&15F81E4C&0                                   : PS/2 Compatible Mouse
ACPI_HAL\PNP0C08\0                                          : Microsoft ACPI-Compliant System
ROOT\ACPI_HAL\0000                                          : ACPI Multiprocessor PC
21 matching device(s) found.

2007-04-06 04:40:48 : <INIT> 2. PCI devices

PCI\D347PRT\0000                                            : D347PRT SCSI Controller
PCI\VEN_10DE&DEV_0392&SUBSYS_341A1458&REV_A1\4&2CCDD017&0&0008: NVIDIA GeForce 7600 GS
PCI\VEN_11AB&DEV_4362&SUBSYS_E0001458&REV_22\4&19FEE395&0&00E4: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller
PCI\VEN_1904&DEV_8139&SUBSYS_00000000&REV_01\4&20E0FF6A&0&00F0: Ethernet Controller
PCI\VEN_197B&DEV_2363&SUBSYS_B0001458&REV_02\4&23995DF6&0&00E5: JMicron JMB36X Controller
PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_F2\3&13C0B0C5&0&F0: Intel(R) 82801 PCI Bridge - 244E
PCI\VEN_8086&DEV_2810&SUBSYS_00000000&REV_02\3&13C0B0C5&0&F8: Intel(R) ICH8/ICH8R Family LPC Interface Controller - 2810
PCI\VEN_8086&DEV_2822&SUBSYS_B0001458&REV_02\3&13C0B0C5&0&FA: Intel(R) 82801HR/HH/HO SATA RAID Controller
PCI\VEN_8086&DEV_2830&SUBSYS_50041458&REV_02\3&13C0B0C5&0&E8: Intel(R) ICH8 Family USB Universal Host Controller - 2830
PCI\VEN_8086&DEV_2831&SUBSYS_50041458&REV_02\3&13C0B0C5&0&E9: Intel(R) ICH8 Family USB Universal Host Controller - 2831
PCI\VEN_8086&DEV_2832&SUBSYS_50041458&REV_02\3&13C0B0C5&0&EA: Intel(R) ICH8 Family USB Universal Host Controller - 2832
PCI\VEN_8086&DEV_2834&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D0: Intel(R) ICH8 Family USB Universal Host Controller - 2834
PCI\VEN_8086&DEV_2835&SUBSYS_50041458&REV_02\3&13C0B0C5&0&D1: Intel(R) ICH8 Family USB Universal Host Controller - 2835
PCI\VEN_8086&DEV_2836&SUBSYS_50061458&REV_02\3&13C0B0C5&0&EF: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
PCI\VEN_8086&DEV_283A&SUBSYS_50061458&REV_02\3&13C0B0C5&0&D7: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
PCI\VEN_8086&DEV_283E&SUBSYS_50011458&REV_02\3&13C0B0C5&0&FB: Intel(R) ICH8 Family SMBus Controller - 283E
PCI\VEN_8086&DEV_283F&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E0: Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
PCI\VEN_8086&DEV_2847&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E4: Intel(R) ICH8 Family PCI Express Root Port 5 - 2847
PCI\VEN_8086&DEV_2849&SUBSYS_00000000&REV_02\3&13C0B0C5&0&E5: Intel(R) ICH8 Family PCI Express Root Port 6 - 2849
PCI\VEN_8086&DEV_284B&SUBSYS_A0021458&REV_02\3&13C0B0C5&0&D8: Microsoft UAA Bus Driver for High Definition Audio
PCI\VEN_8086&DEV_29A0&SUBSYS_00000000&REV_02\3&13C0B0C5&0&00: Intel(R) P965/G965 Processor to I/O Controller - 29A0
PCI\VEN_8086&DEV_29A1&SUBSYS_00000000&REV_02\3&13C0B0C5&0&08: Intel(R) P965/G965 PCI Express Root Port - 29A1
22 matching device(s) found.

2007-04-06 04:40:48 : <INIT> 3. HDAUDIO devices

HDAUDIO\FUNC_01&VEN_10EC&DEV_0883&SUBSYS_1458E601&REV_1000\4&348770F&0&0201: Realtek High Definition Audio
1 matching device(s) found.

2007-04-06 04:40:48 : <INIT> 4. USB devices

USB\ROOT_HUB\4&1A8C7E64&0                                   : USB Root Hub
USB\ROOT_HUB\4&2B6A1C74&0                                   : USB Root Hub
USB\ROOT_HUB\4&3726F7FA&0                                   : USB Root Hub
USB\ROOT_HUB\4&51D35F1&0                                    : USB Root Hub
USB\ROOT_HUB\4&53E9AE0&0                                    : USB Root Hub
USB\ROOT_HUB20\4&18C956F9&0                                 : USB Root Hub
USB\ROOT_HUB20\4&1A81320&0                                  : USB Root Hub
USB\VID_03F0&PID_2B17\FN0DQF5                               : USB Printing Support
USB\VID_05E3&PID_0605\5&1280F5EB&0&2                        : Generic USB Hub
USB\VID_05E3&PID_0605\6&29E12175&0&4                        : Generic USB Hub
USB\VID_0DDA&PID_2026\0000001                               : USB Mass Storage Device
USB\VID_3538&PID_0042\0000000000016B                        : USB Mass Storage Device
USBPRINT\HEWLETT-PACKARDHP_LASERJET_1020\7&1D3BC847&0&USB001: Hewlett-PackardHP LaserJet 1020
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210____MMC/SD&REV_1.9E\0000001&2: Generic IC1210    MMC/SD USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210________CF&REV_1.9E\0000001&0: Generic IC1210        CF USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210________MS&REV_1.9E\0000001&1: Generic IC1210        MS USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_IC1210________SM&REV_1.9E\0000001&3: Generic IC1210        SM USB Device
USBSTOR\DISK&VEN_GENERIC&PROD_USB_FLASH_DISK&REV_0.00\0000000000016B&0: Generic USB Flash Disk USB Device
18 matching device(s) found.

My M/B is... Gigabyte P965-DS4 version 1, it has JMicron RAID included along with the Intel ICH8R, seems to be an issue with the conflict between em'

Not sure how to fix it...

Where can I download the older BASE? can anybody mail me 7.03rc4...?

jerometam@hotmail.com

my DPs_BASE.ini

[General]
; preferred language
prefLang    = "English"
; yes/no, enable or disable the wizard-style buttons, if not specified: yes
wizardButtons    = "yes"
; yes/no, enable or disable the GUI, if not specified: yes
GUI        = "yes"

[Settings]
; disc/bartpe/multibootDisc
instPlatform    = "disc"
; trailing backslash is allowed, but not necessary
location    = "H:\Unattended Windows\0. XPCD"
; none/all/select, if select, specify them below, if not specified: all
DriverPacks    = "select"
; 1/2, method to install the DriverPacks, if not specified: 2
DPsMethod    = "2"
; GUIRunOnce/RunOnceEx/custom, if not specified: GUIRunOnce
finisherMethod    = "GUIRunOnce"

; this section is optional!
[OptionalSettings]
; none/all/select/paths/patterns, enable or disable Keep The Drivers (KTD) , if not specified: none
KTD        = "false"
; <path>, to specify a custom KTD cache location, if not specified: default (%SystemRoot%\DriverPacks)
KTDlocation    = "%SystemRoot%\DriverPacks"
; yes/no, enable or disable QuickStream Cache (QSC), if not specified: yes
QSC        = "yes"

; you should only add this section if you've set [Settings]\DriverPacks to "select"
[SelectDriverPacks]
DP_Chipset    = "yes"
DP_CPU        = "yes"
DP_Graphics_A    = "yes"
DP_Graphics_B    = "yes"
DP_Graphics_C    = "yes"
DP_LAN        = "yes"
DP_MassStorage    = "yes"
DP_Sound_A    = "yes"
DP_Sound_B    = "yes"
DP_WLAN        = "yes"
DP_MassStorage_textmode = "yes"

; this section is optional!
[OptionalSettingsOther]
; CCC/CCP, use ATI Catalyst Control Center or ATI Catalyst Control Panel (only relevant when slipstreaming DriverPack Graphics A)
ATI_cpl        = "CCC"

\*******************************************************************************************\

My DPs_BASE.log

2007-04-06 17:33:02 : <INIT> DriverPacks BASE 7.04 initialized.
2007-04-06 17:33:02 : <INIT> Host environment: WIN_XP Service Pack 2 on X86 CPU.
2007-04-06 17:33:02 : <INIT> Created temporary working directory.
2007-04-06 17:33:02 : <INIT> Imported proxy settings from Internet Explorer.
2007-04-06 17:33:02 : <INIT> Start scanning for DriverPacks for the wnt5_x86-32 platform.
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Chipset 6.12!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Chipset 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack CPU 6.09.1!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack CPU 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Graphics A 7.01!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Graphics A 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Graphics B 6.12!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Graphics B 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Graphics C 7.01!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Graphics C 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack LAN 7.01!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack LAN 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack MassStorage 7.01.1!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack MassStorage 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Sound A 7.01!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Sound A 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Sound B 6.12!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack Sound B 7.04!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack WLAN 7.01!
2007-04-06 17:33:02 : <INIT>     Detected DriverPack WLAN 7.04!
2007-04-06 17:33:02 : <INIT>     Could not detect any 3rd party DriverPacks.
2007-04-06 17:33:02 : <INIT>     Finished scanning.
2007-04-06 17:33:02 : <INIT> Detected settings file "H:\Unattended Windows\4. Drivers\DPs_BASE.ini".
2007-04-06 17:33:02 : <INIT> Windows XP Professional -  Retail SP2 detected.
2007-04-06 17:33:02 : <INIT> The platform wnt5_x86-32_disc will be used (which is the 'disc' installation platform for the OS family 'wnt5_x86-32').
2007-04-06 17:33:02 : <INIT> Imported settings from settings file.
2007-04-06 17:33:02 : <GUI>  Initialized GUI.
2007-04-06 17:33:02 : <GUI>  Created a list of all available language files.
2007-04-06 17:33:02 : <GUI>  Set the last used language, English, as the GUI language.
2007-04-06 17:33:17 : <GUI>  Refreshed UpdateChecker with success.
2007-04-06 17:33:18 : <GUI>  Saved settings!
2007-04-06 17:33:18 : <GUI>  Closed GUI.
2007-04-06 17:33:18 : <SEL>  Selected module: mod_slip_wxp_x86-32_disc_m2.
2007-04-06 17:33:18 : <PREP> QuickStream Cache available for DriverPack MassStorage text mode drivers!
2007-04-06 17:33:18 : <PREP> Removed all attributes from \I386.
2007-04-06 17:33:18 : <PREP> Deleted old method 2 related files.
2007-04-06 17:33:18 : <PREP> Restored \I386\winnt.sif.
2007-04-06 17:33:18 : <PREP> Restored \I386\txtsetup.sif.
2007-04-06 17:33:18 : <PREP> Restored \I386\dosnet.inf.
2007-04-06 17:33:18 : <PREP> Restored original setup: method 2 was used previously.
2007-04-06 17:33:18 : <PREP> Cleaned up \$OEM$\cmdlines.txt.
2007-04-06 17:33:18 : <SLIP> Created necessary directory structure for method 2.
2007-04-06 17:33:18 : <SLIP> Copied files necessary for method 2.
2007-04-06 17:33:18 : <SLIP> Extracted files necessary for method 2.
2007-04-06 17:33:19 : <SLIP> Deleted old presetup.cmd file from \I386.
2007-04-06 17:33:19 : <SLIP> Created \I386\presetup.cmd file.
2007-04-06 17:33:19 : <SLIP> Updated \I386\txtsetup.sif to support method 2.
2007-04-06 17:33:19 : <SLIP> Updated \I386\dosnet.inf to support method 2.
2007-04-06 17:33:36 : <SLIP> Copied DriverPacks to \OEM.
2007-04-06 17:33:36 : <SLIP> English (RyanVM's) UpdatePack detected: no HDA hotfix will be slipstreamed.
2007-04-06 17:33:36 : <SLIP> Slipstreamed DP MassStorage text mode drivers using QuickStream Cache.
2007-04-06 17:33:41 : <SLIP> Removed entries from \I386\txtsetup.sif that will be updated.
2007-04-06 17:33:41 : <SLIP> Removed entries from \I386\dosnet.inf that will be updated.
2007-04-06 17:33:57 : <SLIP> Updated \I386\dosnet.inf and \I386\txtsetup.sif to support DP MassStorage text mode drivers.
2007-04-06 17:33:57 : <SLIP> Updated \I386\winnt.sif to support method 2.
2007-04-06 17:33:57 : <SLIP> Updated DPsFnshr.ini to disable KTD.
2007-04-06 17:33:57 : <SLIP> Updated \I386\winnt.sif's GUIRunOnce section.
2007-04-06 17:33:57 : <SLIP> Slipstream finished in 39 seconds.
2007-04-06 17:34:00 : <CLNP> Temporary working directory successfully deleted.
2007-04-06 17:34:00 : Program terminated.