DriverPacks.net Forum - [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Franeker) — Thu, 15 Mar 2007 16:11:37 +0000

Eeklo? Mooi tussen BRUGGE en Gent. Woonde Ik op een keer in Middelburg en moest naar Gent elke week - Met de veerboot van Vlissingen - Breskens, bus naar Brugge, en trein naar Gent. Ik herinner geen *Westerscheldetunnel* N62 - het is nu veel te gemakkelijk, denk Ik.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Jaak) — Wed, 14 Mar 2007 19:23:32 +0000

De kat is onschuldig. Ze houdt gewoon van muizen. LOL.

I bet he is plugging these holes at the moment. He's good at this.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Franeker) — Wed, 14 Mar 2007 17:19:57 +0000

===========
PCI devices
===========

PCI\VEN_1002&DEV_5460&SUBSYS_20031028&REV_00\4&27EA4097&0&0008: ATI MOBILITY RADEON X300
PCI\VEN_1180&DEV_0476&SUBSYS_01881028&REV_B3\4&2FA23535&0&08F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller
PCI\VEN_1180&DEV_0552&SUBSYS_01881028&REV_08\4&2FA23535&0&09F0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_1180&DEV_0822&SUBSYS_01881028&REV_17\4&2FA23535&0&0AF0: SDA Standard Compliant SD Host Controller
PCI\VEN_14E4&DEV_170C&SUBSYS_01881028&REV_02\4&2FA23535&0&00F0: Broadcom 440x 10/100 Integrated Controller
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_D3\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_2590&SUBSYS_00000000&REV_03\3&61AAA01&0&00 : Mobile Intel(R) 915GM/PM/GMS/910GML Express Processor to DRAM Controller - 2590
PCI\VEN_8086&DEV_2591&SUBSYS_00000000&REV_03\3&61AAA01&0&08 : Mobile Intel(R) 915GM/PM Express PCI Express Root Port - 2591
PCI\VEN_8086&DEV_2641&SUBSYS_00000000&REV_03\3&61AAA01&0&F8 : Intel(R) 82801FBM LPC Interface Controller - 2641
PCI\VEN_8086&DEV_2653&SUBSYS_01881028&REV_03\3&61AAA01&0&FA : Intel(R) 82801FBM Ultra ATA Storage Controllers - 2653
PCI\VEN_8086&DEV_2658&SUBSYS_01881028&REV_03\3&61AAA01&0&E8 : Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
PCI\VEN_8086&DEV_2659&SUBSYS_01881028&REV_03\3&61AAA01&0&E9 : Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
PCI\VEN_8086&DEV_265A&SUBSYS_01881028&REV_03\3&61AAA01&0&EA : Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
PCI\VEN_8086&DEV_265B&SUBSYS_01881028&REV_03\3&61AAA01&0&EB : Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
PCI\VEN_8086&DEV_265C&SUBSYS_01881028&REV_03\3&61AAA01&0&EF : Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_266D&SUBSYS_542314F1&REV_03\3&61AAA01&0&F3 : Conexant D110 MDC V.9x Modem
PCI\VEN_8086&DEV_266E&SUBSYS_01881028&REV_03\3&61AAA01&0&F2 : SigmaTel C-Major Audio
PCI\VEN_8086&DEV_4220&SUBSYS_27218086&REV_05\4&2FA23535&0&18F0: Intel(R) PRO/Wireless 2200BG Network Connection
18 matching device(s) found.

===========
USB devices
===========

USB\ROOT_HUB\4&150BE945&0 : USB Root Hub
USB\ROOT_HUB\4&34FFDC66&0 : USB Root Hub
USB\ROOT_HUB\4&38190979&0 : USB Root Hub
USB\ROOT_HUB\4&6A59CCE&0 : USB Root Hub
USB\ROOT_HUB20\4&30FD3CA&0 : USB Root Hub
USB\VID_046D&PID_C016\5&7E16FA&0&1 : USB Human Interface Device
USB\VID_0566&PID_3002\5&7E16FA&0&2 : USB Composite Device
USB\VID_0566&PID_3002&MI_00\6&3AD97536&0&0000 : USB Human Interface Device
USB\VID_0566&PID_3002&MI_01\6&3AD97536&0&0001 : USB Human Interface Device
USB\VID_413C&PID_8103\5&1BE64F42&0&1 : Dell Wireless 350 Bluetooth Internal Card
10 matching device(s) found.

===========
Dell Mainboard
===========
Chipset: Intel i915PM/GM
Bios: Dell A09 9/28/2005
System Memory: DDR2 1024 MBytes @ 266 MHz.

===========
Processor
===========
Pentium M740 running at 1.73 GHz.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (mr_smartepants) — Wed, 14 Mar 2007 16:23:48 +0000

@Franeker
Could you post your HWID strings so your chipset can be added properly? Use the link in my signature.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Franeker) — Wed, 14 Mar 2007 15:49:27 +0000

I really appreciate the work you folks have put into this issue.

I too have the Inspiron 6000 with the Mobility X300 graphics card, and was unpleasantly surprised that the ATI drivers and Dell do not peacefully co-exist. I guess Dell still has a difficult time shedding its' proprietary inclinations....

Anyway, I found this thread and your website through a Google search and although I'm a fairly quick study, I admit to puzzlement as to where to begin to *crack* the ATI drivers so that they will install on the Dell laptop.

At the risk of being a PITA, might one of you post a walk-through of the steps, in layman's terms, of what must be done to accomplish this.

Most appreciated, and thanking you in advance.

Fran

Oh, just noticed where Muiz3 is from, so will add "Heel Hartelijk bedankt, hoor! Uit welke stad komt jij"
(Nee, Ik ben geen Nederlander, maar kan Ik een klein beetje Hollands.... SPREKEN, niet schrijven - zoals je kan goed zien... het spijt mij, maar gebruiken ze niet veel Hollands hier in California....)

Wat gebeurde met muizen een en twee? Een Kat?

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (muiz) — Sat, 03 Mar 2007 02:32:39 +0000

More cards with this prob.

"RADEON IGP 320M" = ati2mtag_U1, PCI\VEN_1002&DEV_4336&SUBSYS_118110CF
"RADEON IGP 340M" = ati2mtag_RS200M, PCI\VEN_1002&DEV_4337&SUBSYS_11A410CF

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (mr_smartepants) — Fri, 02 Mar 2007 20:30:13 +0000

Geez, there I go reinventing the wheel again!
Thanks Bâshrat the Sneaky and crew. I really should have seen that for myself. I did poke around in the mobility.inf file. I'll plug my HWID in there with my widescreen tweak and let 'er rip.
See what happens when you can't see the forrest for the trees?

You guys just saved me a few days work.

Here's my HWID for Gateway M505, native screen res 1280x800 32-bit.

 
=========== 
PCI devices 
=========== 
  
PCI\VEN_1002&DEV_4E50&SUBSYS_206117C0&REV_00\4&13B9B28C&0&0008: ATI MOBILITY RADEON 9600/9700 Series

I've posted a tutorial here for anyone interested in the widescreen tweaks.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Wim Leers) — Fri, 02 Mar 2007 17:16:39 +0000

A Murder of Crows wrote:

on a side note, this should work for any dell inspiron 6000 that uses the x300 cards, not just the 6000D series....i'm not sure how many Inspiron 6000 system models were made, though...i only ran into the 6000 and the 6000D.
now, the changes you are mentioning in the above post, will that affect the pack in a significant way? should i wait to d/l for a bit?

thank you all again

You could make the changes yourself. Just extract DP Graphics A, make the changes and recompress it using 7-zip.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (A Murder of Crows) — Fri, 02 Mar 2007 17:04:02 +0000

on a side note, this should work for any dell inspiron 6000 that uses the x300 cards, not just the 6000D series....i'm not sure how many Inspiron 6000 system models were made, though...i only ran into the 6000 and the 6000D.

now, the changes you are mentioning in the above post, will that affect the pack in a significant way? should i wait to d/l for a bit?

thank you all again

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Wim Leers) — Fri, 02 Mar 2007 16:57:35 +0000

OK, thanks for posting that so fast

@DriverPacks Team:

In mobility.inf, change this:

"ATI MOBILITY RADEON X300" = ati2mtag_M22, PCI\VEN_1002&DEV_5460
"ATI MOBILITY RADEON X300 " = ati2mtag_M24, PCI\VEN_1002&DEV_3152

;--- on ASUS notebooks ---
"ATI MOBILITY RADEON X300 (ASUS)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_19521043

;--- on HP ZD 8000 notebook (zorro1) ---
"ATI MOBILITY RADEON X300 (HP ZD 8000)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_3082103C

to this:

"ATI MOBILITY RADEON X300" = ati2mtag_M22, PCI\VEN_1002&DEV_5460
"ATI MOBILITY RADEON X300 " = ati2mtag_M24, PCI\VEN_1002&DEV_3152

;--- on ASUS notebooks ---
"ATI MOBILITY RADEON X300 (ASUS)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_19521043

;--- on Dell Inspiron 6000D notebook (A Murder of Crows) ---
"ATI MOBILITY RADEON X300 (Dell Inspiron 6000D)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_20031028

;--- on HP ZD 8000 notebook (zorro1) ---
"ATI MOBILITY RADEON X300 (HP ZD 8000)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_3082103C

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (A Murder of Crows) — Fri, 02 Mar 2007 16:47:41 +0000

Looked it over and it seems like i'm good! nice job guys, thanx!

===========
PCI devices
===========

PCI\VEN_1002&DEV_5460&SUBSYS_20031028&REV_00\4&27EA4097&0&0008: ATI MOBILITY RADEON X300
PCI\VEN_1180&DEV_0476&SUBSYS_01881028&REV_B3\4&2FA23535&0&08F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller
PCI\VEN_1180&DEV_0552&SUBSYS_01881028&REV_08\4&2FA23535&0&09F0: OHCI Compliant IEEE 1394 Host Controller
PCI\VEN_1180&DEV_0822&SUBSYS_01881028&REV_17\4&2FA23535&0&0AF0: SDA Standard Compliant SD Host Controller
PCI\VEN_14E4&DEV_170C&SUBSYS_01881028&REV_02\4&2FA23535&0&00F0: Broadcom 440x 10/100 Integrated Controller
PCI\VEN_8086&DEV_2448&SUBSYS_00000000&REV_D3\3&61AAA01&0&F0 : Intel(R) 82801 PCI Bridge - 2448
PCI\VEN_8086&DEV_2590&SUBSYS_00000000&REV_03\3&61AAA01&0&00 : Mobile Intel(R) 915GM/PM/GMS/910GML Express Processor to DRAM Controller - 2590
PCI\VEN_8086&DEV_2591&SUBSYS_00000000&REV_03\3&61AAA01&0&08 : Mobile Intel(R) 915GM/PM Express PCI Express Root Port - 2591
PCI\VEN_8086&DEV_2641&SUBSYS_00000000&REV_03\3&61AAA01&0&F8 : Intel(R) 82801FBM LPC Interface Controller - 2641
PCI\VEN_8086&DEV_2653&SUBSYS_01881028&REV_03\3&61AAA01&0&FA : Intel(R) 82801FBM Ultra ATA Storage Controllers - 2653
PCI\VEN_8086&DEV_2658&SUBSYS_01881028&REV_03\3&61AAA01&0&E8 : Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
PCI\VEN_8086&DEV_2659&SUBSYS_01881028&REV_03\3&61AAA01&0&E9 : Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
PCI\VEN_8086&DEV_265A&SUBSYS_01881028&REV_03\3&61AAA01&0&EA : Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
PCI\VEN_8086&DEV_265B&SUBSYS_01881028&REV_03\3&61AAA01&0&EB : Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
PCI\VEN_8086&DEV_265C&SUBSYS_01881028&REV_03\3&61AAA01&0&EF : Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
PCI\VEN_8086&DEV_266D&SUBSYS_542314F1&REV_03\3&61AAA01&0&F3 : Conexant D110 MDC V.92 Modem
PCI\VEN_8086&DEV_266E&SUBSYS_01881028&REV_03\3&61AAA01&0&F2 : SigmaTel C-Major Audio
PCI\VEN_8086&DEV_4220&SUBSYS_27218086&REV_05\4&2FA23535&0&18F0: Intel(R) PRO/Wireless 2200BG Network Connection
18 matching device(s) found.

===========
USB devices
===========

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Wim Leers) — Fri, 02 Mar 2007 16:40:04 +0000

mr_smartepants wrote:

I am working on my own catalyst driverpack modded for mobility use. The ATI website here lists graphics chipsets and vendors supported by the official catalyst suite. If your vendor and chipset is not listed (both listings are required) then the official catalyst suite won't install without modification.
The DH modtool modifies several INF files that WILL BREAK the catalyst suite for anything other than a mobility chipset. Because of that, it's highly unlikely that Bâshrat the Sneaky and the crew will include modded files in the main Graphics_A driverpack.
There are limitations with building a 3rd party driverpack because the DPBase won't let you set the option for the CCC in a 3rd party driverpack. I'm working my pack based on modifying Bashrat's Graphics_A pack for my own use. If I get it working properly, I may upload it to Rapidshare or another site (with Bâshrat the Sneaky approval of course).
There are several other files you need to modify for proper widescreen display. If I can find the online tutorial, I'll post it later.
For widescreen support, you have to manually edit two INF files in 2KXP_INF folder (CX_*****.INF, I can't remember offhand).
If I get this working right, I may post a tutorial since the one I found a year ago is very hard to find (can't find it now).

In fact we DO. Check D\G\A\1 for the "mobility.inf" file. By using an extra .inf file, we don't break the WHQL signing on the original driver files!

@all:
The TS said it was a X300 Mobile. Currently these X300 Mobiles are supported by the mobility.inf file:

"ATI MOBILITY RADEON X300" = ati2mtag_M22, PCI\VEN_1002&DEV_5460
"ATI MOBILITY RADEON X300 " = ati2mtag_M24, PCI\VEN_1002&DEV_3152

;--- on ASUS notebooks ---
"ATI MOBILITY RADEON X300 (ASUS)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_19521043

;--- on HP ZD 8000 notebook (zorro1) ---
"ATI MOBILITY RADEON X300 (HP ZD 8000)" = ati2mtag_M22, PCI\VEN_1002&DEV_5460&SUBSYS_3082103C

Could the TS please post his HWID? Then all we have to do is add his HWID to this list and we're done TS, check my sig for a tool to get your HWIDs. Or simply post your DPsFnshr.log file.

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Helmi) — Fri, 02 Mar 2007 16:38:27 +0000

Just as a sinde note:
You cannot test this specific issue in VPC since it does not emulate your actual hardware.
Instead, it will use generic ones for which drivers are provided through the VPC AddOns!

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (A Murder of Crows) — Fri, 02 Mar 2007 16:30:36 +0000

well, keep me posted i guess. i haven't tried the pack yet because i just reinstalled windows on the lappy and have it running stable. when i've gotten everything set up as perfect as i can, i'll do a ghost of the drive, install a virtualpc, and see what happens. but, since i was installing windows on both my systems at the moment, and ran into this exact video driver issue, i figured i'd ask

Re: [SOLVED] Dell Inspiron 6000D: problem with Mobility X300 installation

null@example.com (Helmi) — Fri, 02 Mar 2007 16:24:34 +0000

Will do!

I try to stick around and read as much as possible (mind you, I will also have to moderte one thread or another ), but sometimes, things may slip past me