DriverPacks.net Forum - Vista / 7 DriverPack Mass Storage

[REQ] USB 3.0 ACER Extensa M2710

2017-05-07T11:05:36Z

Hi,

HWID:
IUSB30\ROOT_HUB30&VID_8086&PID_A12F

https://global-download.acer.com/GDFile … SC=EMEA_11

[REQ] JMicron card for HP Pavillion DV6

2015-09-07T16:39:09Z

JMicron Card Reader Driver

HWID:
VEN_197B&DEV_2383
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45010.exe

Mass Storage Drivers [Update needed]

2014-11-14T16:11:48Z

Hi,

There are many scenarios where new mobos need SATA drivers for proper Windows setup hard disk drives detection. Although I think this issue is related to the lack of new mass storage drivers integrated to boot.wim, when booting Windows setup program in a USB 2.0 the hard disk is detected, not when booting using USB 3.0 ports. So I really don't know if ultimately this problem is related to the lack of new mass storage or/and USB 3.0 drivers not injected into the wim files.

SEEHCRI.SYS driver

2014-11-12T01:12:48Z

I deleted it by mistake and can't find it anywhere to download pls help me. Driver pack solution sends me here devid.drp.su/?dev=DETECTEDINTERNAL%5CSEEHCRI to download the driver but the link doesn't works. Another driver is missing and cannot be installed and needs to be downloaded is USB\ROOT_HUB20&VID8086&PID1E26&REV0004 Link for this one is http://devid.drp.su/?dev=USB\ROOT_HUB20 … %26REV0004 which also doesn't works pls help me I'm going through alot of agony.

USB 3.0 drivers

2014-06-11T21:30:11Z

Some laptops manufactured during the transition from USB 2.0 to USB 3.0 had both 2.0 and 3.0 ports on the same laptop. My understanding is that because the mobo oems had not yet integrated USB 3 fast enough into all of the motherboards, the PC oems included USB 3 ports that were connected via PCI Express.

Are most of those USB 3 drivers included in DP MassStorage as opposed to DP Chipset?

Thank you.

Stop 7B - Misc drive pack (x64)

2013-11-27T20:43:02Z

The miscellaneous driver pack does not have a forum, but since the STOP 7B is a storage error, I figured I'd list it in here.

I've discovered that the toshiba HDD protection drivers bundled in the Misc driver pack (x64) seem to cause a blue screen on several different computers. I'm not sure who handles this, but if anyone could care to confirm, and possibly have them removed, that might be a good idea.

[Beta] Mass Storage x64

2013-03-08T08:48:32Z

http://www.mediafire.com/?96mh3be8e78siya

12.13 Feb 2013
- Added: - (All)Adaptec\1 Adaptec SAS/SAS2 RAID Series DriverVer=11/29/2012,7.1.0.30034
- Added: - (All)Adaptec\2 Adaptec HostRAID U320 Driver DriverVer=02/10/2010,2.0.0.213
- Updated: - (All)Areca\1 ARECA (X86-64-SCSIPORT) SATA RAID Host Adapter DriverVer=01/11/2013,6.20.00.25
- Updated: - (All)ASmedia\1 Asmedia 106x SATA Controller DriverVer=09/17/2012,1.3.9.000
- Updated: - (All)Dawincontrol\1 Dawicontrol DC-133 RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\2 Dawicontrol DC-150 RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\3 Dawicontrol DC-154 RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\4 Dawicontrol DC-3410 RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\5 Dawicontrol DC-300e/310e RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\6 Dawicontrol DC-324e RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\7 Dawicontrol DC-600e RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\8 Dawicontrol DC-624e RAID Controller DriverVer=01/07/2013, 4.20
- Updated: - (All)Dawincontrol\9 Dawicontrol DC-4300 RAID Controller DriverVer=01/07/2013, 4.20
- Added: - (All)Dawincontrol\10 Dawicontrol DC-29160 U3W SCSI DriverVer=10/27/2010, 5.10
- Added: - (All)Dawincontrol\11 Dawicontrol DC-2975U SCSI DriverVer=10/27/2010, 5.10
- Added: - (All)Dawincontrol\12 Dawicontrol DC-2976U SCSI DriverVer=10/27/2010, 5.10
- Added: - (All)Dawincontrol\13 Dawicontrol DC-2980 U2W SCSI DriverVer=10/27/2010, 5.10
- Added: - (All)Dawincontrol\14 Dawicontrol DC-2974 PCI SCSI DriverVer=10/27/2010, 5.10
- Added: - (All)Dawincontrol\15 Dawicontrol DC-2964F SCSI DriverVer=10/27/2010, 5.10
- Updated: - (All)Highpoint\3 RocketRAID 3xxx/4xxx Controller DriverVer=08/29/2012, 1.3.68.29
- Updated: - (All)Highpoint\4 RocketRAID 62x SATA Controller DriverVer=06/06/2012, 1.3.12.606
- Updated: - (All)Highpoint\4 RocketRAID 278x SAS Controller DriverVer=10/23/2012, 1.2.12.1023
- Updated: - (All)Highpoint\4 RocketRAID 271x/272x SAS Controller DriverVer=10/23/2012, 1.3.12.1023
- Updated: - (All)Highpoint\4 RocketRAID 274x_3x SAS Controller DriverVer=10/23/2012, 1.2.12.1023
- Updated: - (All)Highpoint\4 RocketRAID 276x SAS Controller DriverVer=10/23/2012, 1.2.12.1023
- Added: - (All)Highpoint\5 RocketCache 32XX HBA Controller DriverVer=03/15/2012, 1.1.12.0315
- Added: - (All)Highpoint\5 DataCenter 7280 SATA Controller DriverVer=06/17/2011, 1.0.11.617
- Added: - (All)Highpoint\5 RocketRAID 64x SATA Controller DriverVer=06/06/2012, 1.2.12.606
- Added: - (All)Highpoint\5 RocketRAID 640L/642L/644L/644LS SATA Controller DriverVer=11/26/2012, 1.2.12.1126
- Added: - (All)Highpoint\6 RocketRAID 26xx SAS Controller DriverVer=05/24/2012, 1.6.12.524
- Added: - (All)Highpoint\6 RocketRAID 2680 SAS Controller DriverVer=06/27/2012, 1.6.12.627
- Updated: - (All)LSI\6 LSI PCI Fusion-MPT FC Driver DriverVer=01/07/2008,1.27.01.00
- Added: - (All)LSI\7 3ware Sas 97XX DriverVer = 08/10/2011,5.01.00.046
- Added: - (All)LSI\8 LSI MegaSAS Controller DriverVer = 11/07/2012,6.505.05.00
- Added: - (All)LSI\9 LSI 3ware 9000 Series SAS/SATA DriverVer = 08/10/2010,3.00.05.056
- Added: - (All)LSI\11 LSI Logic MegaRAID SATA/SAS 8xxx/9xxx series RAID Controller DriverVer=11/07/2012,6.505.05.00
- Added: - (All)LSI\12 LSI PCI Fusion-MPT U320 DriverVer=06/03/2008,1.28.03.00
- Added: - (All)LSI\13 LSI PCI Fusion-MPT SAS2 Controller (StorPort) DriverVer=05/30/2012,2.00.58.00
- Added: - (All)LSI\14 LSI PCI Fusion-MPT SAS Controller (StorPort) DriverVer=06/13/2011,1.34.03.00
- Added: - (All)Marvell\4 Marvell 64xx/63xx SAS Controller DriverVer=10/27/2009,3.1.0.2407
- Added: - (All)Marvell\5 Marvell Serial ATA Gen 1/2 DriverVer= 08/27/2010,1.0.2010.827
- Updated: - (All)Silicon Image\2\3\1 Silicon Image SiI 3112/3512/436e/4379/437a SATARaid Controller DriverVer=02/02/2010, 1.0.17.1
- Updated: - (All)Silicon Image\3\1  Silicon Image SiI 3114 SATALink Controller DriverVer=04/22/2009, 1.2.9.0
- Updated: - (All)Silicon Image\3\2  Silicon Image SiI 3114 SATARaid Controller DriverVer=04/21/2009, 1.5.20.3
- Updated: - (All)Silicon Image\4\1 Silicon Image SiI 3124 SATALink Controller DriverVer=04/21/2009, 1.1.15.0
- Updated: - (All)Silicon Image\4\2 Silicon Image SiI 3124 SoftRaid 5 Controller DriverVer=04/13/2010, 1.5.23.0
- Added: - (All)Silicon Image\5\2 Silicon Image SiI 3x12 SATARaid Driver DriverVer=02/02/2010, 1.0.17.1
- Added: - (All)Silicon Image\5\1 Silicon Image SiI 3x12 SATALink Driver DriverVer=07/23/2009, 1.2.15.3
- Added: - (All)Silicon Image\7\1  Silicon Image SiI 3132 SoftRaid 5 Driver DriverVer=04/21/2009, 1.5.19.0
- Added: - (All)Silicon Image\7\2 Silicon Image SiI 3132 SATALink Controller DriverVer=06/24/2009, 1.0.15.6
- Added: - (All)Via\2 VIA RAID Controller DriverVer =03/04/2011, 6.0.7600.6250
- Added: - (All)Via\3 VIA StorX IDE Controller DriverVer = 04/12/2011,7.0.7600.1103
- Added: - (Win7)LSI\10 LSI WarpDrive Solid State Storage DriverVer=03/07/2011,2.10.43.00
- Added: - (Win8)AMD\1 AMD SATA AHCI Standard Controller (SB7xx) DriverVer=09/17/2012,1.3.001.0050

OCZ Revodrive/Z-drive driver?

2012-12-16T05:28:19Z

I don't have one personally, but can these be added to win7 MS pack?

Also, XP.

[SLVD] Windows 7 32bit Mass Storage error

2012-10-21T17:25:59Z

I have been using the very same MassStorage drivers for 3 or 4 months now and today I was making an updated Win 7 32bit Wim from a clean untouched source with October Updates from KUC. I slipstream my drivers and updates the same way every month with a DISM script I made. I only use MassStorage in the Boot.wim and Install.wim. No other drivers and this is the error I am getting. Not sure what details you guys need from me but I will post as needed. I have a live Asus Machine I use to test all of my slipstreamed OS. I do not use Virtual Machine for this kinda test

Uploaded with ImageShack.us

UPDATE:

I downloaded the newest MassStorage pack, problem solved. The old pack must have gotten corrupt somehow.

[SLVD] Problem with 12.02

2012-03-02T03:57:09Z

Hi guys,
Thanks again for your hard work in creating the driver packs, your efforts are greatly appreciated.

I seem to have found a problem, not certain exactly where it lies. I'm installing Win 7 SP1 (doesn't matter if it's x64 or x32) onto a Dell Optiplex 990 using an automated installation. This problem is not limited to that hardware, though, as it happened at least once under VMWare Player, too. I've added the expanded Mass Storage drivers to the $WinPEDriver$ folder in the root of the boot media (either a DVD or USB thumb drive). The message 'Setup is starting' appears and after a lengthy pause a message box appears with the following text:

'Windows Setup could not install one or more boot-critical drivers. To install Windows, make sure that the drivers are valid, and restart the installation.'

You can click OK, but the installation seems to just stop at that point with no further messages.

When setup stops, I examined setupact.log and the last line contains the error message and the lines before contain messages about loading various OEMxx.INF files:

2012-03-01 21:54:09, Info PnPIBS: Installing driver X:\windows\INF\oem23.inf ...
2012-03-01 21:54:09, Info PnPIBS: Installing driver X:\windows\INF\oem24.inf ...
2012-03-01 21:59:10, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not install one or more boot-critical drivers. To install Windows, make sure that the drivers are valid, and restart the installation.]

On looking at OEM24.INF I see it is one of the Intel drivers from \All\M\Intel\3 renamed. I removed the 3 folder, and tried again, but then got the same message referring to the INF in \All\M\Intel\4. Removed that folder and the machine installed correctly. I also found that if I changed the BIOS of the machine from the default 'RAID' to ACHI that installation proceeded even with both 3 and 4 folders in place.

An earlier version of my installation disk had an earlier version of the driver pack (sorry not sure which one, but there was only a 1 and a 2 folder under Intel) works fine, too. I'm trying to support the widest range of hardware possible, so don't wish to remove these to sacrifice that support.

The relevant output from the HWID tool is below:

Any ideas or suggestions?
Rod

============
RAID Devices
============
PCI\VEN_8086&DEV_2822&SUBSYS_047E1028&REV_04\3&11583659&0&FA
Name: Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
Hardware ID's:
PCI\VEN_8086&DEV_2822&SUBSYS_047E1028&REV_04
PCI\VEN_8086&DEV_2822&SUBSYS_047E1028
PCI\VEN_8086&DEV_2822&CC_010400
PCI\VEN_8086&DEV_2822&CC_0104
Compatible ID's:
PCI\VEN_8086&DEV_2822&REV_04
PCI\VEN_8086&DEV_2822
PCI\VEN_8086&CC_010400
PCI\VEN_8086&CC_0104
PCI\VEN_8086
PCI\CC_010400
PCI\CC_0104
1 matching device(s) found.

[IMPL] jmraid 36x /jmraid 37x no IDE-Driver

2012-01-27T20:17:49Z

I have found a Bug, that jmraid (IDE) doesnt work on all OS`s

when i use the "JMicron Raid Controller" (jraid jm36x) in Raid.Mode, then the IDE-Controller is missing in windows Setup and Windows installation is failed! when i integrate the missing "jmide.inf" then the controller is useable... =/

[JM.Mfg]
;%PCI\CC_0101.DeviceDesc% = jmide_Inst,,PCI\CC_0101 ;Compatible Device ID for generic Dual PCI IDE
%PCI\CC_0101.DeviceDesc% = jmide_Inst , PCI\VEN_197B&DEV_2361&CC_0101
%PCI\CC_0101.DeviceDesc% = jmide_Inst , PCI\VEN_197B&DEV_2363&CC_0101
%PCI\CC_0101.DeviceDesc% = jmide_Inst , PCI\VEN_197B&DEV_2365&CC_0101
%PCI\CC_0101.DeviceDesc% = jmide_Inst , PCI\VEN_197B&DEV_2366&CC_0101
%PCI\CC_0101.DeviceDesc% = jmide_Inst , PCI\VEN_197B&DEV_2368&CC_0101
%PCI\CC_0101.DeviceDesc_37x% = jmide_Inst , PCI\VEN_197B&DEV_2370&CC_0101
%PCI\CC_0101.DeviceDesc_37x% = jmide_Inst , PCI\VEN_197B&DEV_2371&CC_0101
%PCI\CC_0101.DeviceDesc_37x% = jmide_Inst , PCI\VEN_197B&DEV_2372&CC_0101
%PCI\CC_0101.DeviceDesc_37x% = jmide_Inst , PCI\VEN_197B&DEV_2373&CC_0101

PCI\CC_0101.DeviceDesc = "JMB36X Standard Dual Channel PCIE IDE Controller"
PCI\CC_0101.DeviceDesc_37x = "JMB37X Standard Dual Channel PCIE IDE Controller"

[IMPL] IT8211 ATA RAID Driver

2011-11-15T21:17:33Z

This Driver isn't in actual Driverpack 11.11
Can you please add them to the next Release?

I have added it manually during setup with W7 x64, works without problems
http://dlsvr04.asus.com/pub/ASUS/misc/s … _V1328.zip

[SLVD]GA-890FXA-UD7/GIGABYTE SATA2 Driver and NEC USB 3.0 Driver

2011-11-07T08:55:39Z

Hi i have GA-890FXA-UD7
window 7 x64
are there any driver for these on here
GIGABYTE SATA2 Driver
and
NEC USB 3.0 Driver
etc
http://www.gigabyte.com/products/produc … id=3567#dl
many thanks

[IMPL] Dawicontrol Drivers

2011-05-21T08:49:07Z

Please add this Drivers
i have an DC-3410 RAID Controller to test...
http://www.dawicontrol.com/index.php?cmd=raid

[IMPL] MassStorage - ASMedia drivers

2011-04-21T09:11:26Z

Win(all) SATA3 drivers here: ftp://174.142.97.10/Drivers/All/SATA/AS … 1.1.9).zip
Station-drivers has v1.2.1.000, yet i have not as yet been able to ferret them out. Does anyone else know of a link?